Sangoma built its business by designing hardware that simply works, the first time. We have taken the time to ensure our BRI solution delivers.
The Sangoma A500 S/T BRI Interface Card delivers superior audio quality and scalability. Expand from two to twenty-four BRI interfaces with optional Octasicâ„¢ Telco-grade, hardware echo cancellation.
A single PCI or PCI Express slot hosts the connection for up to 24 BRI interfaces(48 B-Channels) and ensures common synchronous clocking for all channels with no signaling issues. The card is 100% software configurable.
Finally, a BRI card that upholds Sangoma's high standards of quality in engineering and untiring product support.
The A500 consists of a Remoraâ„¢ BRI daughterboard mounted on the AFT PCI card. The Remoraâ„¢ BRI card has three sockets, each of which can accept an S/T BRI module.
One S/T BRI module has two S/T four wire interfaces, which support TE or NT modes of operation. Changing modes requires no jumpers - simply invert the module.
Up to three additional Remoraâ„¢ daughterboards can be mounted in empty slot positions beside the A500 assembly. These are connected to the A500 by a special backplane bus connector.
- From 2 to 24 BRI interfaces (4 to 48 B-Channels) are supported. Mix TE and NT modes, as required. Changing modes requires no jumpers - simply invert the colour-coded module.
- Supports AsteriskÂ®, Yateâ„¢, FreeSWITCHâ„¢, CallWeaverâ„¢, PBX/IVR projects, as well as other Open Source and proprietary PBX, Switch, IVR or VoIP gateway applications.
- Single synchronous PCI and PCI Express interface for all 24 BRI interfaces (48 B-Channels).
- Six BRI interfaces (12 B-Channels) per Remoraâ„¢ card.
- Dimensions: 2U Form factor: 187mm x 55mm for use in restricted chassis.
- Short 2U compatible mounting clips included for installation in 2U rackmount servers and high quality, tested 2m 8-pin RJ45 port splitter cables included.
- 32 bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
- Autosense compatibility with 5 V and 3.3 V PCI busses.
- Fully PCI 2.2 and PCI Express compliant, compatible with all commercially available motherboards, proper sharing of PCI interrupts.
- Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
- Power: 800mA peak, operational 300mA max at +3.3 V or 5 V.
- Temperature range: 0 - 50Â°C.
- Optimized DMA stream and hardware-level HDLC handling unload the host CPU.
- Raw bitstream interfaces can be used to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch. WANPIPEÂ® supports certified, field tested, and reliable Frame Relay, PPP, HDLC and X.25.
- Lifetime warranty on parts and labour.