NTG-AP0400 Sangoma Transcoding Appliance - 400 Sessions - NTG-LI0400; order 1x D500-100E separately
Most IPapplications require the use of multiple types of voice codecs, which are used to digitally compress voice signals, to save on bandwidth requirements. While voice signals from the ( ) always come in the form of the G.711 codec, the VoIP terminal equipment and networks support a variety of different voice codecs, such as G.729, G.726, AMR, G.722, iLBC, etc. VoIP infrastructures need to include the capability to mediate between endpoints supporting different codecs, yet this functionality requires digital signal processing tasks that are often costly, resource-intensive, and can affect the quality of the voice signals, if it introduces too much and delay.
The NetBorder Transcodingallows to convert numerous simultaneous channels of transcoding from one type of codec (e.g. G.711) to another (e.g. G.729), without affecting .
Theallows running 400, 800, 1200, 1600, 2000 or 4000 channels of any-to-any voice codec conversion, with unmatched quality¹. All codecs are fully indemnified²; no additional licensing is required for their use.
The NetBorder Transcodingis a SIP back-to-back user agent, capable of handling SIP signalling traffic, that provides a stand-alone and flexible deployment option. The gateway is configurable via an user-friendly web management interface. The codecs offered during the codec negotiation phase of the call can be defined to meet specific environment requirements on a per call basis.
The NetBorder Transcodingis offered in the appliance format for an all-in-one turnkey solution. The option of an ISO package to be installed on any server with a Sangoma D500 Transcoding board is also available.
- Bandwidth savings for SIP trunking deployments
- Remote call center agent pools
- Carrier IP network peering
- HD Voice over IP deployments
- Voice quality improvements
- SIP V2/RFC3261
- 1U Appliance
- 3 RJ-45 Ethernet ports
- 4 USB ports in the back
- 1 DVI output port
- 250W universal for 1U solution
- 1U : 480.4(W) x 474(D) x 44(H) mm; 19”(W) x 18.7”(D) x 1.7”(H)
- Wide range of codecs support via Sangoma transcoding hardware
DTMF Detection and Generation:
- RFC2833 Tone relay
- In-band detection and generation
Management and Configuration:
- Web GUI
- Command line interface
- Detailed logs with user configurable file size and auto-rotation