Talkswitch 48vsx

Product Notice - TalkSwitch is now FortiVoice.  Please click here for the latest products.  Most items are backwards compatible.  Please call us if you have any questions.

SKU: CT-TS001-148003
Condition: New

Availability: Out of stock

About Us
You may also be interested in the following product(s)

Every TalkSwitch phone system comes with the same great features that improve your image, save you money and keep you connected anywhere, including auto attendants, voicemail, ring groups and more.



Analog trunks (FXO) 4
Analog extension interfaces (FXS) 8
Extension capacity 32. 8 may be analog phones.
USB host 2, future use.
LAN interface 1
Memory 28 hours.
Music input Phono jack (1/8" mono) or stored .wav file
PA output Phono jack (1/8" mono)
Power source 100 to 240 VAC, 50 to 60 Hz 18 VDC, 1.5 A, adapter included.
Power-failure line to extension jacks Extension 4 connects to Line 1 (not supported in Australia)

Analog extension interface

Connector type RJ-11, 2-pin
Trunk type Loop start
Interface impedance 600 ohms
Loop range 0600 ohms
Hook flash supported Yes
On-hook voltage 35 volts
Off-hook loop voltage source 35 volts
Off-hook loop current 23 mA to 40 mA
Dial tone level -2.4 dBm
Ringing voltage 90 volts RMS
Ringing frequency 20 Hz true sine wave
Total ringing load 5 REN

Analog trunks

Connector type RJ-11, 2-pin
Trunk type Loop start
Interface impedance Configurable, 600 ohms, 600 complex, 900 ohms, 900 complex
Ringing impedance 3,900 ohms
Ringing sensitivity 45 volts RMS @ 20 Hz
REN 0.7B
Longitudinal balance 69 dB
Signal level -10 dB
Distinctive ring supported Yes
Caller ID support FSK, all lines

VoIP features

  • Embedded SIP server for IP extensions
  • Multibranch VoIP networking
  • G.711 -law/A-law, G.729a codecs
  • G.168 echo cancellation
  • VAD, silence suppression
  • Adaptive jitter buffer
  • Packet loss concealment
  • 8 concurrent VoIP sessions
  • Up to 4 service provider accounts
  • Fax tone detection

Dimensions (H x W x L)

Metric 51.6 mm x 203.2 mm x 213.4 mm
Imperial 2.03" x 8" x 8.4"


Metric 0.81 kg
Imperial 1.77 lbs

Regulatory Approvals
ACTA TIA/EIA/IS-968A and FCC Part 68
Industry Canada CS-03
FCC Part 15B, Industry Canada ICES-003
System and power adapter comply with UL and CSA


  • Auto attendants: 20
  • Voicemail
  • Remote extensions: 16
  • Easy set-up
  • Expandable
  • Analog and IP phones
  • Dial-by-name directory
  • Voicemail to e-mail
  • Voicemail broadcast
  • Music on hold
  • Call cascade
  • Ring groups
  • Uniform call distribution
  • Call queue
  • Automatic route selection
  • Toll restriction
  • Call detail record logging
  • Line appearance (with selected TalkSwitch IP phones)
  • Multiple language prompts and software
  • Call forward
  • Auto fax detection
  • Call conference
  • Call back/call bridge
  • Mode scheduling
  • Call hold/transfer/park
  • Call screening
  • Intercom
  • Call pickup
  • Distinctive ring
  • Public announcement
  • Remote management
  • LAN capability

Requirements and recommendations:

For Management software 7.10:
Fully updated Windows 7, Windows XP, Windows Vista or Windows 2000.
Updated Java Runtime Environment (version 6 update 23 or higher).
Processor: 1 GHz.
RAM: Windows 7 and Vista: 1 GB; Windows XP and 2000: 512 MB.
Hard Disk Space: 250MB.
Screen Resolution: 1024x768.

Wiring: TalkSwitch usually requires no extra wiring beyond the standard infrastructure in most commercial and residential buildings. In rare cases, depending on your existing infrastructure and desired distribution of extensions, some re-wiring may be necessary. Consult your Authorized TalkSwitch Reseller or talk to a telephone systems and service professional in your area.

Telephone company services:
Some phone company services can enhance your TalkSwitch performance:
  • Caller ID is recommended but not required.
  • Hunt/Rollover/Busy Forwarding is recommended if you have more than one phone line connected to TalkSwitch.
  • Transfer and Clear frees a phone line after a call has been transferred to a remote extension.
  • 3-way Calling allows you to use a single line to forward calls to remote extensions, conference calls and access call bridge. If you want the caller to hear music continuously while on hold, we do not recommend using this service.
  • Telephone Company Voicemail allows a caller to leave a message even if all lines become unavailable. We do not recommend using Call Waiting, because TalkSwitch cant answer two calls on the same line. The second caller would be unable to access your auto attendants, extensions, voicemail and call cascade sequences.
Additional Info
Additional Info
Model CT-TS001-148003
Manufacturer Fortinet
Condition New
Color No
Downloads N/A
Video N/A
Write Your Own Review
You're reviewing: Talkswitch 48vsx
How do you rate this product? *
  1 star 2 stars 3 stars 4 stars 5 stars

Use spaces to separate tags. Use single quotes (') for phrases.

Found in Categories

Signifyd | Fraud Protection and Chargeback Prevention for eCommerce