Details
Every TalkSwitch phone system comes with the same great features
that improve your image, save you money and keep you connected
anywhere, including auto attendants, voicemail, ring groups and
more.
84vsx TECHNICAL SPECIFICATIONS
System | |
| Analog trunks (FXO) | 8 |
| Analog extension interfaces (FXS) | 4 |
| Extension capacity | 32. 4 may be analog phones. |
| USB host | 2, future use. |
| LAN interface | 1 |
| Memory | 28 hours. |
| Music input | Phono jack (1/8" mono) or stored .wav file |
| PA output | Phono jack (1/8" mono) |
| Power source | 100 to 240 VAC, 50 to 60 Hz — 18 VDC, 1.5 A, adapter included. |
| Power-failure line to extension jacks | Extension 4 connects to Line 1 (not supported in Australia) |
Analog extension interface | |
| Connector type | RJ-11, 2-pin |
| Trunk type | Loop start |
| Interface impedance | 600 ohms |
| Loop range | 0–600 ohms |
| Hook flash supported | Yes |
| On-hook voltage | 35 volts |
| Off-hook loop voltage source | 35 volts |
| Off-hook loop current | 23 mA to 40 mA |
| Dial tone level | -2.4 dBm |
| Ringing voltage | 90 volts RMS |
| Ringing frequency | 20 Hz – true sine wave |
| Total ringing load | 5 REN |
Analog trunks | |
| Connector type | RJ-11, 2-pin |
| Trunk type | Loop start |
| Interface impedance | Configurable, 600 ohms, 600 complex, 900 ohms, 900 complex |
| Ringing impedance | 3,900 ohms |
| Ringing sensitivity | 45 volts RMS @ 20 Hz |
| REN | 0.7B |
| Longitudinal balance | 69 dB |
| Signal level | -10 dB |
| Distinctive ring supported | Yes |
| Caller ID support | FSK, all lines |
VoIP features | |
| |
Dimensions (H x W x L) | |
| Metric | 51.6 mm x 203.2 mm x 213.4 mm |
| Imperial | 2.03" x 8" x 8.4" |
Weight | |
| Metric | 0.91 kg |
| Imperial | 1.99 lbs |
Regulatory Approvals FEATURES
| |
For Management software 7.10:
Fully updated Windows 7, Windows XP, Windows Vista or Windows 2000.
Updated Java Runtime Environment (version 6 update 23 or higher).
Processor: 1 GHz.
RAM: Windows 7 and Vista: 1 GB; Windows XP and 2000: 512 MB.
Hard Disk Space: 250MB.
Screen Resolution: 1024x768.
Wiring: TalkSwitch usually requires no extra wiring beyond the standard infrastructure in most commercial and residential buildings. In rare cases, depending on your existing infrastructure and desired distribution of extensions, some re-wiring may be necessary. Consult your Authorized TalkSwitch Reseller or talk to a telephone systems and service professional in your area.
Telephone company services:
Some phone company services can enhance your TalkSwitch performance:
- Caller ID is recommended but not required.
- Hunt/Rollover/Busy Forwarding is recommended if you have more than one phone line connected to TalkSwitch.
- Transfer and Clear frees a phone line after a call has been transferred to a remote extension.
- 3-way Calling allows you to use a single line to forward calls to remote extensions, conference calls and access call bridge. If you want the caller to hear music continuously while on hold, we do not recommend using this service.
- Telephone Company Voicemail allows a caller to leave a message even if all lines become unavailable. We do not recommend using Call Waiting, because TalkSwitch can’t answer two calls on the same line. The second caller would be unable to access your auto attendants, extensions, voicemail and call cascade sequences.
Add-on Phone Product Descriptions:
- TS-350i IP Phone
- TS-350i IP Phone with Power
- TS-450i IP Phone
- TS-450i IP Phone with Power
- TS-550i IP Phone
- TS-550i IP Phone with Power
- TS-860i IP Cordless and Base
- TS-600 Analog Phone
Additional Information
| Model | TS-84vsx-Bundle |
|---|---|
| Manufacturer | N/A |
| Downloads | No |
| Video | No |
| System Skill Level | Novice |
| System Size | Small: 1-20 Users |
| Supported Extension Types | Analog, VoIP |
| Supported Trunk Types | Analog/POTS, SIP Trunks |
| Supported Common Features | Auto Attendant, Call Queues, Email integration, Find me/Follow me, Forward to Remote Number, Voicemail |





