{"product_id":"teltonika-tsw101-automotive-poe-switch-4-poe-gigabit-ports-for-vehicle-networks-tsw101000000","title":"Teltonika TSW101 Automotive PoE+ Switch – 4 PoE+ Gigabit Ports for Vehicle Networks (TSW101000000)","description":"\u003cp\u003eThe Teltonika TSW101 (TSW101000000) is a compact automotive PoE+ switch for vehicles that carry cameras, routers, or other Ethernet gear. It runs straight from a 12 V or 24 V vehicle battery, needs no configuration, and powers four devices over their Ethernet cables, so you skip extra power adapters and wiring in tight spaces.\u003c\/p\u003e\n\u003cp\u003eFive Gigabit ports, a rugged anodized aluminum housing, and a -40 °C to 75 °C operating rating make it a practical fit for buses, service trucks, emergency vehicles, and mobile command units. Plug in your uplink, connect your devices, and wire it to vehicle power.\u003c\/p\u003e\n\u003ch3\u003eThe Telecom Spot Take\u003c\/h3\u003e\n\u003cp\u003eThe TSW101 is the switch we point customers to when a vehicle needs to power a few PoE cameras or access points without a separate injector or AC power. It is small, needs no setup, and is simple to wire. The key planning point is voltage: on a 24 V system you get a 60 W PoE budget, but on 12 V the total drops to 30 W. It is not ideal if you need VLANs, SFP uplinks, or more than four powered devices.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour PoE+ output ports:\u003c\/strong\u003e Ports 1-4 deliver IEEE 802.3af\/at (PoE and PoE+) power at 30 W per port, enough for IP cameras, access points, and other PoE devices in the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery-powered, no PSU needed:\u003c\/strong\u003e The 2-pin industrial DC socket accepts 9-30 VDC, so the switch connects directly to a 12 V or 24 V vehicle electrical system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE budget that follows your voltage:\u003c\/strong\u003e 60 W total on 24 VDC and 30 W total on 12 VDC. The switch does not cap output itself, so keep the combined load within that budget.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive Gigabit Ethernet ports:\u003c\/strong\u003e All ports run at 10\/100\/1000 Mbps with auto MDI\/MDI-X, and port 5 serves as the uplink to your router or modem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug and play:\u003c\/strong\u003e No configuration needed. Connect the uplink, plug in devices, and apply power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt for mobile installs:\u003c\/strong\u003e Anodized aluminum housing, IP30, -40 °C to 75 °C operating temperature, 5% to 95% non-condensing humidity, and a grounding screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle and regional certifications:\u003c\/strong\u003e E-mark and UN ECE R10, plus FCC, IC (ISED), CE, UKCA, and RCM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow standby draw:\u003c\/strong\u003e 0.64 W idle and 2.31 W max for the switch itself, so the switch itself adds little load to the vehicle battery.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand \/ model\u003c\/td\u003e\n\u003ctd\u003eTeltonika TSW101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder code \/ SKU\u003c\/td\u003e\n\u003ctd\u003eTSW101000000 (standard package without power supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch type\u003c\/td\u003e\n\u003ctd\u003ePlug-and-play automotive PoE+ switch, no configuration needed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e5 x RJ45, 10\/100\/1000 Mbps, auto MDI\/MDI-X: 4 x PoE out, 1 x uplink\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIEEE standards\u003c\/td\u003e\n\u003ctd\u003e802.3i, 802.3u, 802.3ab, 802.3x, 802.3az\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE output ports\u003c\/td\u003e\n\u003ctd\u003ePorts 1-4; IEEE 802.3af (Type 1) and 802.3at (Type 2), Alternative A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE power per port\u003c\/td\u003e\n\u003ctd\u003e30 W max (at PSE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal PoE budget\u003c\/td\u003e\n\u003ctd\u003e60 W at 24 VDC; 30 W at 12 VDC (at PSE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003e2-pin industrial DC socket, 9-30 VDC (pin 1 power, red; pin 2 ground, black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower source\u003c\/td\u003e\n\u003ctd\u003e12 V or 24 V vehicle battery; no additional power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption\u003c\/td\u003e\n\u003ctd\u003eIdle 0.64 W; max 2.31 W (switch only); 62.3 W max with full PoE load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching performance\u003c\/td\u003e\n\u003ctd\u003e10 Gbps non-blocking bandwidth; 128 KB packet buffer; 2K MAC address table; 9216-byte jumbo frames; cable detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Ethernet cable length\u003c\/td\u003e\n\u003ctd\u003e100 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus LEDs\u003c\/td\u003e\n\u003ctd\u003e1 x power, 10 x Ethernet status (orange for 10\/100 Mbps link, green for 1000 Mbps link)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther\u003c\/td\u003e\n\u003ctd\u003e1 x grounding screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eAnodized aluminum housing and panels; IP30\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e115 x 32 x 95 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e384 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN rail, wall, or flat surface (each requires an additional kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-40 °C to 75 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eE-mark, UN ECE R10, FCC, IC (ISED), Anatel, CE, UKCA, RCM, CB Scheme\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage box (W x H x D)\u003c\/td\u003e\n\u003ctd\u003e175 x 35 x 150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS \/ HTS code\u003c\/td\u003e\n\u003ctd\u003e851762 \/ 8517.62.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTSW101 automotive PoE+ switch\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis order code ships without a power supply because the switch is designed to run from vehicle power. Power wiring, mounting kits, and Ethernet cables are sold separately. Box contents can vary by order code, so ask us to confirm before you order if a specific accessory matters for your install.\u003c\/p\u003e\n\u003ch3\u003eBest For, Use Cases and Setup Tips\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e transit buses, police and fire vehicles, utility and service trucks, and mobile command units that need to power a handful of PoE cameras or access points from the vehicle battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot ideal for:\u003c\/strong\u003e installs that need VLANs or other managed features, SFP fiber uplinks, more than four powered devices, AC-powered racks, or a total PoE load above 60 W.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBudget by voltage:\u003c\/strong\u003e On a 12 V vehicle, plan for 30 W total across all PoE ports, such as two 15 W cameras. On 24 V, you can use the full 60 W, with no single port above 30 W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire it right:\u003c\/strong\u003e Connect your router or modem to port 5, PoE devices to ports 1-4, then wire the 2-pin socket (red to power, black to ground) and use the grounding screw.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck the PoE mode:\u003c\/strong\u003e The ports use PoE Alternative A, with power on pins 1-2 and 3-6. Confirm your powered devices accept 802.3af or 802.3at power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRead the LEDs:\u003c\/strong\u003e Green means a 1000 Mbps link, solid orange means a 10\/100 Mbps link, and blinking orange shows active traffic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeed Profinet?\u003c\/strong\u003e Profinet Class A conformance is a separate order code (TSW101000001). This listing is the standard TSW101000000.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComparison at a Glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eCopper ports\u003c\/th\u003e\n\u003cth\u003ePoE budget\u003c\/th\u003e\n\u003cth\u003eUplinks\u003c\/th\u003e\n\u003cth\u003eInput voltage\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW101\u003c\/td\u003e\n\u003ctd\u003e5 x Gigabit (4 x PoE+)\u003c\/td\u003e\n\u003ctd\u003e60 W at 24 VDC; 30 W at 12 VDC\u003c\/td\u003e\n\u003ctd\u003eCopper port 5\u003c\/td\u003e\n\u003ctd\u003e9-30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW200\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit PoE+\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003ctd\u003e9-57 V (44 V or higher for PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW210\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit, no PoE\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003ctd\u003e9-57 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eCan the TSW101 run from a 12 V vehicle battery?\u003c\/h4\u003e\n\u003cp\u003eYes. It accepts 9-30 VDC, so it works on 12 V and 24 V systems. On 12 V, the total PoE budget is 30 W; on 24 V it is 60 W.\u003c\/p\u003e\n\u003ch4\u003eDoes TSW101000000 include a power supply?\u003c\/h4\u003e\n\u003cp\u003eNo. This standard package ships without a power supply, since the switch is built to run from vehicle power through its 2-pin DC socket.\u003c\/p\u003e\n\u003ch4\u003eHow many PoE devices can I power?\u003c\/h4\u003e\n\u003cp\u003eFour, on ports 1-4, at 30 W max per port. Keep the combined load within 60 W on 24 V or 30 W on 12 V, because the switch does not limit output.\u003c\/p\u003e\n\u003ch4\u003eDoes it need any setup?\u003c\/h4\u003e\n\u003cp\u003eNo. The TSW101 is plug and play with no configuration needed.\u003c\/p\u003e\n\u003ch4\u003eWhat automotive certifications does it have?\u003c\/h4\u003e\n\u003cp\u003eThe TSW101 carries E-mark and UN ECE R10 certification, along with FCC, IC (ISED), CE, UKCA, and RCM.\u003c\/p\u003e\n","brand":"Teltonika","offers":[{"title":"Default Title","offer_id":49095340097673,"sku":"TSW101000000","price":85.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0338\/6245\/1337\/files\/e7aade_5315b9fb543c4f3bbde9f754b1204582_mv2.png?v=1795129046","url":"https:\/\/www.thetelecomspot.com\/products\/teltonika-tsw101-automotive-poe-switch-4-poe-gigabit-ports-for-vehicle-networks-tsw101000000","provider":"The Telecom Spot","version":"1.0","type":"link"}