{"product_id":"teltonika-tsw202-managed-poe-switch-8-gigabit-ports-and-2-sfp-tsw202000040","title":"Teltonika TSW202 Managed PoE+ Switch – 8 Gigabit Ports and 2 SFP (TSW202000040)","description":"\u003cp\u003eThe Teltonika TSW202 (TSW202000040) is a managed industrial PoE+ switch for sites that need to power and control devices from one box. Eight Gigabit PoE+ ports deliver 30 W each from a 240 W budget, two SFP ports handle fiber uplinks, and PROFINET, EtherNet\/IP, and MRP support make it at home on factory networks.\u003c\/p\u003e\n\u003cp\u003eIt runs TSWOS with L2 switching plus additional L3 features, so you get VLAN segmentation and fine-grained control that an unmanaged switch cannot offer.\u003c\/p\u003e\n\u003ch3\u003eThe Telecom Spot Take\u003c\/h3\u003e\n\u003cp\u003eThe TSW202 is the switch we recommend when PoE devices need to be managed, not just powered. Eight ports at 30 W each cover PTZ cameras, access points, and IP phones, and all eight can run at full PoE+ inside the 240 W budget. PROFINET and MRP make it a fit for automation lines. It is not ideal if you just want plug-and-play PoE; the unmanaged TSW200 is simpler. You also need to supply your own DC power, since none comes in the box.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManaged L2 with L3 features:\u003c\/strong\u003e TSWOS gives you VLANs and network interface control to separate cameras, phones, and guest traffic on one switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Gigabit PoE+ ports at 30 W each:\u003c\/strong\u003e Power IP cameras, wireless access points, and VoIP phones directly from the switch, with no outlet needed at each device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e240 W PoE budget:\u003c\/strong\u003e Enough for all eight ports at a full 30 W at the same time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo SFP ports:\u003c\/strong\u003e Run fiber uplinks between buildings or to a distant network closet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial protocols:\u003c\/strong\u003e PROFINET, EtherNet\/IP, and MRP (Media Redundancy Protocol) support for automation networks and redundant ring designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide DC input:\u003c\/strong\u003e 9-57 VDC input, with PoE output working when the supply provides 44 V or more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial temperature rating:\u003c\/strong\u003e -40°C to +75°C operation for cabinets and harsh environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand \/ model\u003c\/td\u003e\n\u003ctd\u003eTeltonika TSW202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrder code \/ SKU\u003c\/td\u003e\n\u003ctd\u003eTSW202000040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch type\u003c\/td\u003e\n\u003ctd\u003eManaged; L2 with additional L3 features; TSWOS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit Ethernet PoE+ (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSFP\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE per port\u003c\/td\u003e\n\u003ctd\u003e30 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax PoE budget (PSE)\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIndustrial protocols\u003c\/td\u003e\n\u003ctd\u003ePROFINET, EtherNet\/IP, MRP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e9-57 VDC (44 V or higher required for PoE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax power consumption (switch only)\u003c\/td\u003e\n\u003ctd\u003e8 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAverage draw, no PoE load\u003c\/td\u003e\n\u003ctd\u003eAbout 1.5-2.4 W idle; 4.7-5.6 W with 8 LAN and 2 SFP links under heavy traffic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing dimensions\u003c\/td\u003e\n\u003ctd\u003e132 x 44.2 x 122 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e610 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +75°C (+25°C maximum when running from a PSU delivered with the switch)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHS \/ HTS code\u003c\/td\u003e\n\u003ctd\u003e851762 \/ 8517.62.00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat's in the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTSW202 switch\u003c\/li\u003e\n\u003cli\u003eQuick Start Guide\u003c\/li\u003e\n\u003cli\u003eUS PSU without connector 250W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBest For, Use Cases and Setup Tips\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eBest for:\u003c\/strong\u003e managed PoE for IP cameras, access points, and VoIP phones in small and midsize businesses; industrial automation networks using PROFINET, EtherNet\/IP, or MRP rings; and sites that need fiber uplinks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot ideal for:\u003c\/strong\u003e simple plug-and-play PoE (choose the TSW200), non-PoE endpoints (choose the TSW210), or closets that need more than eight PoE ports (choose the SWM282).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower first:\u003c\/strong\u003e Use a supply of 44 V or more (inside the 9-57 VDC window) if you plan to use PoE, and leave headroom above your expected device load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding:\u003c\/strong\u003e Ground the switch through its grounding terminal before you connect power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirst login:\u003c\/strong\u003e Log in to the WebUI with the username and password printed on the device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePROFINET networks:\u003c\/strong\u003e When PROFINET is enabled, assign the switch IP with the Teltonika PROFINET configurator, then open the WebUI at that address.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware and security:\u003c\/strong\u003e Update TSWOS to the latest stable release and change default credentials right away.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eComparison at a Glance\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eManagement\u003c\/th\u003e\n\u003cth\u003eCopper ports\u003c\/th\u003e\n\u003cth\u003ePoE budget\u003c\/th\u003e\n\u003cth\u003eUplinks\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW202\u003c\/td\u003e\n\u003ctd\u003eManaged (L2 + L3 features)\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit PoE+\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW200\u003c\/td\u003e\n\u003ctd\u003eUnmanaged\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit PoE+\u003c\/td\u003e\n\u003ctd\u003e240 W\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTSW210\u003c\/td\u003e\n\u003ctd\u003eUnmanaged\u003c\/td\u003e\n\u003ctd\u003e8 x Gigabit, no PoE\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003ctd\u003e2 x SFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eIs a power supply included?\u003c\/h4\u003e\n\u003cp\u003eYes, \u003cspan\u003eUS PSU without connector 250W\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eCan all eight ports deliver full PoE+ at once?\u003c\/h4\u003e\n\u003cp\u003eYes. Each port provides 30 W, and the 240 W budget covers all eight at full load, as long as your supply can deliver it.\u003c\/p\u003e\n\u003ch4\u003eDoes the TSW202 support PROFINET?\u003c\/h4\u003e\n\u003cp\u003eYes. It supports PROFINET, EtherNet\/IP, and MRP.\u003c\/p\u003e\n\u003ch4\u003eCan I use fiber with it?\u003c\/h4\u003e\n\u003cp\u003eYes. Two SFP ports accept SFP transceivers for fiber uplinks.\u003c\/p\u003e\n\u003ch4\u003eWhat temperatures can it handle?\u003c\/h4\u003e\n\u003cp\u003e-40°C to +75°C with 5% to 95% humidity (non-condensing). The maximum drops to +25°C when it runs from a PSU delivered with the switch.\u003c\/p\u003e","brand":"Teltonika","offers":[{"title":"Default Title","offer_id":49086417502345,"sku":"TSW202000040","price":313.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0338\/6245\/1337\/files\/teltonika-tsw202-managed-poe-switch-8-gigabit-ports-and-2-sfp-tsw202000040tsw202000040-1960906.png?v=1795192457","url":"https:\/\/www.thetelecomspot.com\/products\/teltonika-tsw202-managed-poe-switch-8-gigabit-ports-and-2-sfp-tsw202000040","provider":"The Telecom Spot","version":"1.0","type":"link"}