{"product_id":"viking-mps-xp-multicast-paging-server","title":"Viking MPS-XP Multicast Paging Server – 100 SIP Accounts \u0026 100 Multicast Zones","description":"\u003cp\u003eSchools, plants, and campuses do not page one hallway. They page a wing, a building, or the whole site — and they need bells, lockdowns, and all-clear messages to fire on time. The Viking Electronics MPS-XP Multicast Paging Server is a PoE SIP paging endpoint that supports up to 100 independently configurable multicast zones and up to 100 SIP accounts with independent registration. Call one extension to page everywhere, give each zone its own extension, or fire a stored file from a dry-contact trigger. A secure web interface runs the calendar, rules, and integrations.\u003c\/p\u003e\n\u003ch2\u003eThe Telecom Spot Take\u003c\/h2\u003e\n\u003cp\u003eThis box is the brain of a multizone SIP paging system, not a hallway speaker. Viking built it for sites that already have (or will add) multicast speakers, IP horns, and analog amps that need a 600-ohm line feed and a relay closure. Our customers who run schools, universities, and manufacturing floors get the most from the 100-zone map, the bell scheduler with exception dates, and store-and-forward pages that you can review before they hit the speakers.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 SIP accounts, each with its own registration.\u003c\/strong\u003e Map one extension to “all call,” or give every building its own number on the same box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 100 multicast zones with volume, zone priority, and QoS.\u003c\/strong\u003e Route live pages by DTMF code or by which SIP account rang in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStore-and-forward paging.\u003c\/strong\u003e Record the page, review it, then release it so live mics do not feed back through nearby speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 GB of onboard audio.\u003c\/strong\u003e More than 21 hours of bells, tones, and announcements in WAV, MP3, OGG, or FLAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalendar and bell scheduler.\u003c\/strong\u003e Recurring patterns, time-triggered events, exception calendars, delays, and skipped-event support for holidays and late starts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour trigger inputs.\u003c\/strong\u003e Configurable debounce and polarity for evacuation, lockdown, weather, and all-clear contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne programmable relay (2 A @ 30 VDC \/ 250 VAC max).\u003c\/strong\u003e Timed pulses, flash patterns, or rule-based closures to kick an analog amp, strobe, or door circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-ohm line in and line out.\u003c\/strong\u003e Feed background music or a radio URL in; send mono paging audio out to a legacy amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRules engine: 100 rules.\u003c\/strong\u003e Events, conditions, and actions without writing code.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eREST API, MQTT with TLS, and HTTP webhooks.\u003c\/strong\u003e Tie paging to IoT, building management, or any system that can hit a URL.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Class 1, under 4 watts.\u003c\/strong\u003e One Cat5 (or better) drop carries power and data. IEEE 802.3af, SIP 2.0 RFC3261, 100BASE-TX with auto-crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned, manufactured, and supported in the USA.\u003c\/strong\u003e Two-year limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel \/ SKU\u003c\/td\u003e\n\u003ctd\u003eMPS-XP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003ePoE SIP multicast paging server\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIP accounts\u003c\/td\u003e\n\u003ctd\u003eUp to 100, independent registration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulticast zones\u003c\/td\u003e\n\u003ctd\u003eUp to 100, with volume, priority, and QoS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio storage\u003c\/td\u003e\n\u003ctd\u003e2.5 GB; over 21 hours (WAV, MP3, OGG, FLAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRules engine\u003c\/td\u003e\n\u003ctd\u003e100 rules (events, conditions, actions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrigger inputs\u003c\/td\u003e\n\u003ctd\u003e4, configurable debounce and polarity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay output\u003c\/td\u003e\n\u003ctd\u003e1 programmable; 2 A @ 30 VDC \/ 250 VAC maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine I\/O\u003c\/td\u003e\n\u003ctd\u003e600-ohm line-level input; 600-ohm line-level output (mono)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003ePoE Class 1 (\u0026lt; 4 watts), IEEE 802.3af\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003e10\/100BASE-TX, auto-crossover; SIP 2.0 RFC3261\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIP transports\u003c\/td\u003e\n\u003ctd\u003eUDP, TCP, TLS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIP audio codecs\u003c\/td\u003e\n\u003ctd\u003eOpus, Speex 32K\/16K\/8K, G.711u, G.711a, G.722, GSM, iLBC, or L16\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulticast audio codecs\u003c\/td\u003e\n\u003ctd\u003eG.722, G.711a, G.711u, Opus, Speex 32K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnections\u003c\/td\u003e\n\u003ctd\u003e(1) RJ45 10\/100; (1) 3-position terminal block; (1) 4-position terminal block; (1) 5-position terminal block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e5\" × 5.25\" × 1.5\" (127 × 133 × 38 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping weight\u003c\/td\u003e\n\u003ctd\u003eTBD (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating temperature\u003c\/td\u003e\n\u003ctd\u003e0°F to 140°F (−17°C to 60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95% non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgramming\u003c\/td\u003e\n\u003ctd\u003eViking Device Manager + secure web UI; Windows 10\/11, Linux, or Mac on the same LAN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDefault web login\u003c\/td\u003e\n\u003ctd\u003eadmin \/ admin (change on first login)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet run\u003c\/td\u003e\n\u003ctd\u003e100 m (328 ft) typical; PoE extender or fiber media converter for longer runs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitch-port notes\u003c\/td\u003e\n\u003ctd\u003eNot trunk mode; 100 Mbps full duplex; disable STP or enable Portfast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin \/ warranty\u003c\/td\u003e\n\u003ctd\u003eDesigned, manufactured, and supported in the USA; 2-year limited warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eInstall note from Viking:\u003c\/strong\u003e installation requires a network administrator \/ IT technician.\u003c\/p\u003e\n\u003ch2\u003eComparison at a Glance\u003c\/h2\u003e\n\u003cp\u003eSame-family Viking options, using only Viking-published data. The MPS-XP does not include a speaker amplifier. Pair its 600-ohm line out and relay with an amp or with IP multicast endpoints.\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003eViking MPS-XP\u003c\/th\u003e\n\u003cth\u003eViking PA-IP\u003c\/th\u003e\n\u003cth\u003eViking PA-250-IP\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRole\u003c\/td\u003e\n\u003ctd\u003eMulticast paging server\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast adapter with built-in amp\u003c\/td\u003e\n\u003ctd\u003e250-watt 70V SIP\/multicast paging amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSIP accounts\u003c\/td\u003e\n\u003ctd\u003eUp to 100, independent registration\u003c\/td\u003e\n\u003ctd\u003eSIP endpoint (adapter)\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMulticast zones \/ groups\u003c\/td\u003e\n\u003ctd\u003eUp to 100 independent zones\u003c\/td\u003e\n\u003ctd\u003eUp to 10 multicast paging groups\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast paging amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnboard amp\u003c\/td\u003e\n\u003ctd\u003eNo (600-ohm line out to an external amp)\u003c\/td\u003e\n\u003ctd\u003eBuilt-in high-efficiency Class D amp (6 W class in Viking’s PA-IP manual)\u003c\/td\u003e\n\u003ctd\u003e250 watts, 70V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudio library \/ scheduler\u003c\/td\u003e\n\u003ctd\u003e2.5 GB storage, calendar + bell scheduler, 100-rule engine\u003c\/td\u003e\n\u003ctd\u003eLine-level BGM in; pre-page tone; multicast receive\u003c\/td\u003e\n\u003ctd\u003ePaging amplifier for loud coverage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntegrations\u003c\/td\u003e\n\u003ctd\u003eREST API, MQTT (TLS), HTTP webhooks\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast paging adapter feature set\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast amplifier feature set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003ePoE Class 1 (\u0026lt; 4 W)\u003c\/td\u003e\n\u003ctd\u003ePoE Class 3 (\u0026lt; 13 W)\u003c\/td\u003e\n\u003ctd\u003eSIP\/multicast 250 W amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBest fit from Viking’s own use cases\u003c\/td\u003e\n\u003ctd\u003eSchools, universities, manufacturing; multizone + scheduled + triggered pages\u003c\/td\u003e\n\u003ctd\u003eVoIP-to-analog or small multicast speaker runs\u003c\/td\u003e\n\u003ctd\u003eLoud 70V analog speaker plants that also need SIP\/multicast\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWho is the MPS-XP for?\u003c\/h3\u003e\n\u003cp\u003eViking calls out schools, universities, and manufacturing facilities — any site that needs flexible multizone paging, event-triggered announcements, or automated message scheduling.\u003c\/p\u003e\n\u003ch3\u003eDoes it replace my paging amplifier?\u003c\/h3\u003e\n\u003cp\u003eNo. It is a SIP paging endpoint and multicast server. Use the 600-ohm line output and the relay to drive a legacy analog amplifier, and\/or send multicast to IP speakers and horns.\u003c\/p\u003e\n\u003ch3\u003eHow do staff pick a zone?\u003c\/h3\u003e\n\u003cp\u003eThree manufacturer modes: one SIP account to one zone; DTMF codes on a live SIP call to pick zones; or a dedicated SIP account per zone. You can also play stored files from SIP or from the four dry-contact triggers.\u003c\/p\u003e\n\u003ch3\u003eCan it run class-change bells without a live phone call?\u003c\/h3\u003e\n\u003cp\u003eYes. The built-in calendar scheduler and bell scheduler play prerecorded files on recurring patterns, with exception dates, delays, and skipped events. No SIP account is required for that mode.\u003c\/p\u003e\n\u003ch3\u003eWhat do I need on the network?\u003c\/h3\u003e\n\u003cp\u003eA PoE Class 1 port (IEEE 802.3af), 100 Mbps full duplex, not in trunk mode, STP off or Portfast on. Discover the unit with Viking Device Manager on the same LAN, then finish setup in the web UI. Default login is admin \/ admin; change it before you go live.\u003c\/p\u003e\n\u003ch3\u003eHow does it talk to other building systems?\u003c\/h3\u003e\n\u003cp\u003eViking documents a full REST API, MQTT publish\/subscribe with TLS, and HTTP webhooks so another system can start a page with a URL. The 100-rule engine ties those events to zones, files, and the relay.\u003c\/p\u003e","brand":"Viking Electronics","offers":[{"title":"Default Title","offer_id":48253708927113,"sku":"MPS-XP","price":424.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0338\/6245\/1337\/files\/viking-mps-xp-multicast-paging-server-100-sip-accounts-100-multicast-zonesmps-xp-2286682.png?v=1788300547","url":"https:\/\/www.thetelecomspot.com\/products\/viking-mps-xp-multicast-paging-server","provider":"The Telecom Spot","version":"1.0","type":"link"}