Description
Looking for great sound without bulky speakers hanging down? The Bogen MPS1W is a sleek, compact white mini-pendant ceiling speaker built for modern spaces with high ceilings- like warehouses, open-plan offices, retail stores, gyms, and lobbies. It delivers clear paging announcements and pleasant background music with wide 140° coverage so everyone hears every word evenly.
At just 12 inches across and under 8 inches tall, it blends right into your decor while packing surprising punch thanks to its 4½-inch dual-cone driver and smart venting design. Whether you run a 70V distributed system or a simple 16-ohm setup, the rear selector switch makes it quick to match your amplifier. It's tough, good-looking, and ready to install today.
Our setup tip for customers: Always use the included secondary safety attachment point and the optional CK10W cable kit. It takes 30 seconds extra but gives total peace of mind. For 70V systems, start at the 4W or 8W tap in most open spaces-dial it up only if the area is noisy. If your main job is clear voice paging with occasional music, the MPS1W gives you everything you need at a lower cost. Go MPS2W only if you play a lot of music and want sparkling highs.
Key Features
- Wide-dispersion 4½-inch dual-cone driver with integral high-frequency radiator for even 140° coverage
- Clear sound for paging and background music in high-ceiling and open spaces
- Works with both 70V distributed systems and 16-ohm low-impedance setups
- Easy-to-select power taps: 32, 16, 8, 4, 2, 1 watts @ 70V plus 16-ohm setting
- Compact, attractive white ABS enclosure (12" diameter x 7¾" high)
- Powder-coated steel grille that resists damage and looks sharp
- Snap-lock screw terminal plug for fast, secure wiring
- Built-in safety cable attachment point
- Paintable finish to match any decor
- Includes snap-lock input plug; optional CK10W hanging cable kit available
Technical Specifications
- Model: Bogen MPS1W (white)
- Frequency Response (-10 dB): 50 Hz to 14 kHz
- Driver: 4" dual-cone wide-range with integral high-frequency radiator
- Sensitivity: 86 dB (1 W / 1 m, average 100 Hz-10 kHz)
- Dispersion: 140°
- Impedance: 16 ohms / 70V selectable
- Maximum Power: 50 W @ 16 ohms; 32 W @ 70V
- 70V Power Taps: 32, 16, 8, 4, 2, 1 watts
- Enclosure: Textured ABS plastic (paintable)
- Grille: Powder-coated perforated steel
- Terminations: Snap-lock input plug with screw terminals
- Dimensions: 12" diameter x 7¾" high
- Weight: 4 lb 8 oz
- Included: Snap-lock input plug
- Optional Accessory: CK10W white hanging cable kit
- Finish: Textured white