Description
Sangoma A116E with Breakout Panel Kit
A116 is part of Sangomas family of Advanced Flexible
Telecommunications hardware product line using high performance
PCI Express interface,
providing superior performance in critical systems all over the
world. The A116 supports up to 32.8 Mbps of full duplex data
throughout 480 voice calls using 16 "glossary_link">T1/"glossary_link">E1/J1 spans.
With Sangoma boards, you can take advantage of hardware and
software improvements,
as soon as they become available. The A116, like all boards in
Sangomas AFT family,
is field-upgradable with "glossary_link">crash-proof "glossary_link">firmware.
*Sangoma A116E: PCIe, 16 spans, no
H/W Echo Cancellation (not recommended for voice
applications)*
Technical Specifications
- Sixteen T1/"30" class="glossary_link">E1 ports with optimum "58" class="glossary_link">PCIExpress interface for high
performance voice and data applications - Mix T1 channel banks
and E1 networks with
full channel synchronization. "glossary_link">TDM clocking mode lets network timing to be
passed from a network-connected "glossary_link">DS0 to any or all of the other ports so both
T1 and E1 are supported simultaneously - Support for "glossary_link">Asterisk and class="glossary_link">FreeSwitch
- Fully compatible with all commercially available
motherboardsproper "glossary_link">PCI-standard interrupt sharing without
manual tuning - Dimensions: Full height by half length (107mm x
176mm) - Connector: Dense 68 pin SCSI type interface
- Intelligent hardware: Downloadable "glossary_link">FPGA programming with multiple operating
modes; add new features related to voice and/or data when they
become available - Line decoding: HDB3, AMI, B8ZS
- Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan)
- PCI Express Bus Version: 1.1
- Maximum operational power: 9W (2.42A @ 3.3V + 0.083A @
12V) - Temperature range: 0 50 C
- Ring buffer DMA handling for minimum host intervention and
guaranteed data integrity on high volume systems - Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN
PRI - T1/E1 and fractional
T1/E1, multiple channel
HDLC per line for mixed data/"glossary_link">TDM voice applications - Optimized per channel DMA streams and hardware-level HDLC
handling unload the host CPU - Uses raw bitstream interfaces to support arbitrary non-standard
line protocols, such as
non-byte aligned monosynch or bisynch - WANPIPE routing stack is completely independent of
TDM voice class="glossary_link">application for total system
reliability - WANPIPE supports certified, field-tested, and
reliable Frame Relay,
PPP, HDLC, and X.25
Optional DSP Hardware Echo Canceller Daughterboard
- G.1682002 echo
cancellation in hardware - 1024 taps/128 ms tail per channel on all channel densities
- DTMF decoding and tone recognition
- Voice quality enhancement: music protection, acoustic echo
control, and adaptive noise reduction - Does not increase the physical size of the card, and no
additional slot is required
Operating Systems
- Windows 2003, Windows XP,
Windows Server 2008, Windows Vista,
Windows 7 - Linux (all versions, releases and distributions from 1.0
up)
T1/E1 Status Alarms
- RED: Telco Red Alarm
Condition - OOF: Out of Frame
- LOS: Receive Loss of Signal
- AIS: Alarm Indication Signal
- RAI: Remote Alarm Indication (Yellow Alarm)
Line Protocols
Voice CAS, "glossary_link">MFC/"glossary_link">R2, "glossary_link">PRI, "glossary_link">ATM, "glossary_link">Frame Relay, "glossary_link">X.25, HDLC, "glossary_link">PPP, "glossary_link">SS7, Transparent bit-stream, BSC
Higher Level Protocols
IP/IPX over Frame
Relay/"glossary_link">PPP/HDLC/"glossary_link">X.25, X.25 over Frame Relay (Annex G), BSC
over X.25, SNA over
X.25, PPPoE, "65" class="glossary_link">PPPoA, IP over ATM
Certification (Pending)
- FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A,
CIPSR 24, AFIC-2016, IEC 60950, JATE
Diagnostic Tools
WANPIPEMON, System Logs
Warranty
Lifetime warranty on parts and labour. Plus a 30-day no
questions asked return policy.
Production Quality
ISO 9002