Description
The Sangoma Vega 200Gv2 is a compact digital VoIP gateway that connects T1/E1 PRI phone systems and carrier lines to SIP over two E1/T1 ports, with capacity for 60 simultaneous calls. It suits businesses that want to keep a legacy TDM PBX while moving to SIP trunking, and IP-PBX sites that still need PRI connectivity to the PSTN.
The gateway sits at the edge of your network and converts SIP signaling and voice media to and from your T1/E1 lines automatically. T.38 fax, built-in transcoding and local survivability are included, and a setup wizard gets you running quickly.
The Telecom Spot Take
The 200Gv2 is the current hardware revision of Sangoma's dual-span Vega gateway. It keeps the 60-call capacity, two E1/T1 ports, dual Gigabit LAN and external power supply of the original Vega 200G, and runs the v2-only firmware line (Release 13.1), which adds IPv6 support. That firmware is not interchangeable with original 200G units, so check the rear nameplate before upgrading a mixed fleet. It is a strong fit for our customers moving up to two PRIs to SIP. If you only need 30 calls, the Vega 100Gv2 is the smaller option.
Key Features
- 60 simultaneous SIP calls: A fixed 60-call capacity across two T1/E1 PRI ports.
- T1/E1 PRI signaling support: Works with NI1/NI2, AT&T 5ESS, DMS100, Euro-ISDN, QSIG, VN4, CAS (RBS) and R2 MFC, so it can face a carrier or a legacy PBX.
- Two E1/T1 ports: Port 1 is set up as CPE/TE for the carrier and port 2 as NET/NT for a PBX. A cross-over cable reverses either port.
- Dual Gigabit Ethernet: Two Gigabit RJ-45 LAN ports for your data network.
- Local survivability: If the WAN fails, IP phones behind the gateway can keep calling each other, route to a backup switch or connect directly to the PSTN.
- Voice, fax and modem: T.38 fax up to G3, and modem calls up to V.90 over G.711.
- Fast setup and fleet management: A GUI installation wizard handles single sites, and TR-069 and auto configuration support larger rollouts.
- Built-in troubleshooting: Call tracing and debugging tools help you resolve carrier and SIP issues faster.
- Secure voice and management: SIP over TLS, SRTP, and HTTPS and SSH management.
Technical Specifications
| Model / Part Number | Vega 200Gv2 / VEGA-200Gv2-060KIT |
|---|---|
| VoIP Capacity | 60 simultaneous calls |
| Telephony Ports | 2x E1/T1 RJ-45 (port 1 CPE/TE, port 2 NET/NT; reverse with a cross-over cable) |
| T1 Signaling | NI1/NI2, AT&T 5ESS, CAS (RBS), DMS100, ISO QSIG |
| E1 Signaling | Euro-ISDN, ISO QSIG, VN4, CAS R2MFC |
| VoIP Protocol | SIP |
| Fax and Modem | T.38 fax up to G3; modem up to V.90 using G.711 |
| Audio Codecs | G.711 (a-law/u-law), G.723.1, G.729a, G.726, T.38 |
| LAN | 2x RJ-45 Gigabit Ethernet (1000BaseT/100BaseTx/10BaseT) |
| Console | Console port for diagnostics (RJ45-USB console cable included) |
| Firmware | Vega Release 13.1 with IPv6 support (v2 hardware only; not compatible with original Vega 200G units) |
| Routing | Direct Dialing In (DDI), SIP registration to multiple proxies, dial planner, NAT traversal |
| Call Quality | Adaptive jitter removal, silence suppression, comfort noise generation, ToS, DiffServ, 802.1p/Q VLAN tagging, QoS statistics, G.168 echo cancellation (up to 128 ms tail) |
| Security | SIP/TLS and SRTP, HTTPS and SSH management, configurable user passwords |
| Management | HTTP(S) web server, TR-069, SNMP, TFTP/FTP, RADIUS accounting and login, remote firmware upgrade, auto configuration upgrade |
| Power | External 12V (24W) AC/DC adapter |
| Weight | 1.2 kg (2.64 lb) |
| Operating Environment | 0–40°C, 0–90% humidity (non-condensing) |
| In the Box | Vega gateway, 2 E1/T1 RJ45 Cat5 cables, 2 LAN cables, RJ45-USB console cable, mounting feet, external power brick, AC power cord, Quick Start Guide, warranty and license information |
Comparison at a Glance
| Vega 200Gv2 | Vega 200G (original) | Vega 100Gv2 | |
|---|---|---|---|
| Simultaneous Calls | 60 | 60 | 30 |
| LAN Ports | 2x Gigabit | 2x Gigabit | 2x Gigabit |
| Power | External power supply | External power supply | External power supply |
| Firmware Line | Release 13.1 (v2 only) | Release 12.0 | Release 13.1 (v2 only) |
FAQ
How is the Vega 200Gv2 different from the original Vega 200G?
Both handle 60 simultaneous calls over two T1/E1 ports with dual Gigabit LAN. The 200Gv2 is newer hardware that runs the v2 firmware line (Release 13.1), which adds IPv6 support. Firmware for the two versions is not interchangeable, and the rear nameplate shows which version you have.
How do I switch a port between TE and NT mode?
Port 1 is CPE/TE and port 2 is NET/NT. To reverse that, use a cross-over cable; there is no software pin-switching.
Should I choose the Vega 200Gv2 or the Vega 100Gv2?
The 100Gv2 is licensed for 30 VoIP calls on one port. The 200Gv2 handles up to 60 simultaneous calls, so it fits sites that need more than 30 SIP calls through the gateway.
Does it support fax?
Yes. It supports T.38 fax up to G3, and modem calls up to V.90 using G.711.
What is the default admin password?
On Release 13.0 firmware and later, the default password is the unit's serial number in lower case. You will find it on the regulatory label on the unit or on the packaging.

