Description
The Teltonika RUT956 (RUT956A00A00) is a dual-SIM LTE Cat 4 router built for field equipment that needs cellular connectivity plus serial, I/O, and location in one box. It adds RS-232, RS-485, GNSS, USB, and digital I/O to four Ethernet ports and 2.4 GHz Wi-Fi, so PLCs, meters, and controllers can report to the cloud.
The box ships with magnetic-mount mobile and Wi-Fi antennas, an adhesive GNSS antenna, and connector blocks, so most cabinet installs need nothing extra. It is also rated for Class I, Division 2 hazardous locations.
The Telecom Spot Take
Pick the RUT956 when the router is doing more than passing internet traffic. Serial ports let legacy RS-232 and RS-485 equipment reach your network, GNSS adds location and time sync, and the I/O handles simple alarms and controls. That makes it a strong match for utilities, water and energy sites, kiosks with serial peripherals, and fleet or remote assets. If you only need dual-SIM internet with four ports, the RUT951 is simpler and costs less to power.
Key Features
- RS-232 and RS-485 serial: A DB9 RS-232 port and a 6-pin RS-485 industrial socket connect meters, PLCs, and other serial equipment, so you can bring legacy hardware onto an IP network without replacing it.
- GNSS for location and time sync: Built-in GNSS supports location services and time synchronization, and an adhesive GNSS antenna with a 3 m cable comes in the box.
- Dual SIM with auto failover: Two SIM slots with automatic failover and backup WAN switching keep remote sites reachable when one carrier drops.
- Four Ethernet ports and 2.4 GHz Wi-Fi: Connect a local controller, camera, or laptop by cable, and give technicians wireless access on site.
- Digital I/O and USB: Digital input and output for alarms and equipment control, plus a USB Type-A port for external devices.
- Hazardous-location rated: Classified for Class I, Division 2, Groups A, B, C and D (T4) and Class I, Zone 2, Group IIC (T4), with an IP30 housing.
- Remote management: HTTPS WebUI, SSH, SMS commands, and Teltonika RMS for monitoring and configuring a fleet of field routers.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand / model | Teltonika RUT956 |
| Order code / SKU | RUT956A00A00 |
| Cellular | 4G LTE Cat 4 with 3G fallback |
| GNSS | Yes, for location services and time synchronization |
| SIM | 2 x SIM slots, automatic failover |
| Ethernet | 4 x RJ45 |
| Wi-Fi | 2.4 GHz access point |
| Serial | 1 x DB9 (RS-232), 1 x 6-pin industrial socket (RS-485) |
| I/O | 1 x digital input, 1 x digital output (on the 4-pin power connector), plus I/O connector block |
| USB | 1 x USB Type-A for external devices |
| Management | HTTPS WebUI, SSH, SMS utilities (active SIM required), Teltonika RMS |
| Hazardous locations | Class I, Division 2, Groups A, B, C, D, T4; Class I, Zone 2, Group IIC, T4 |
| Ingress protection | IP30 |
| Bundled power adapter | 100-240 VAC input; 9 VDC, 1 A output; 4-pin plug |
| Average power draw | About 1.5 W idle (no SIM); 1.8 W idle with mobile data on; 10.3-11.3 W with every interface loaded (LTE, Wi-Fi, 4 LAN devices, serial, GNSS, a 500 mA USB device, and outputs on) |
| Housing dimensions | 109.5 x 50 x 100 mm |
| Weight | 292 g |
| Operating temperature | -40°C to +40°C general rating; -40°C to +75°C ambient rating for hazardous-location use |
| Operating humidity | 10% to 90% (non-condensing) |
| HS / HTS code | 851762 / 8517.62.00 |
What's in the Box
- RUT956 router
- US PSU with 4-pin connector 9 W
- 2 x mobile antennas (magnetic mount, SMA male, 3 m cable)
- 2 x Wi-Fi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
- GNSS antenna (adhesive, SMA male, 3 m cable)
- RS-485 connector block and I/O connector block
- Ethernet cable (1.5 m)
- SIM adapter kit
- Quick Start Guide
Best For, Use Cases and Setup Tips
Best for: utility and energy telemetry, water and wastewater sites, industrial machines with RS-232 or RS-485 controllers, kiosks with serial peripherals, and remote or mobile assets that need location data.
Not ideal for: plain office internet backup, where the RUT951 is simpler, or sites that need 5G speeds or 5 GHz Wi-Fi.
- Antenna runs: The magnetic-mount antennas on 3 m (mobile) and 1.5 m (Wi-Fi) cables let you put the router inside a metal cabinet and the antennas on top. Place the GNSS antenna with a clear view of the sky.
- First login: Browse to 192.168.1.1, sign in as admin with the password on the device label, and set a new password (8+ characters with an uppercase letter, a lowercase letter, and a digit).
- Power budget: With every interface busy and a 500 mA USB device attached, average draw reaches about 11 W, so size any DC or battery supply with that in mind.
- Hazardous-location wiring: In classified locations, follow Class I, Division 2 / Zone 2 wiring methods (NEC 501.10(B) or CEC 18-152), and never connect or disconnect cables while powered.
- Vibration: In vehicles or near machinery, add a thin layer of dielectric grease to SIM contacts, and use industrial-grade SIMs for extreme temperatures or humid, corrosive air.
Comparison at a Glance
| Model | SIM | Ethernet | Serial / GNSS / USB | Housing |
|---|---|---|---|---|
| RUT956 | 2 SIM | 4 x RJ45 | RS-232, RS-485, GNSS, USB | 109.5 x 50 x 100 mm |
| RUT951 | 2 SIM | 4 x RJ45 | None | 110 x 50 x 100 mm |
| RUT241 | 1 SIM | 2 x RJ45 | None | 83 x 25 x 74 mm |
FAQ
Does the RUT956 have RS-232 and RS-485?
Yes. It has one DB9 RS-232 port and one 6-pin RS-485 industrial socket, and an RS-485 connector block is in the box.
Is a GNSS antenna included?
Yes. The standard box includes an adhesive GNSS antenna with an SMA male connector and a 3 m cable.
Can it run in a hazardous location?
Yes. It is classified for Class I, Division 2 and Class I, Zone 2 hazardous locations, with a -40°C to +75°C ambient rating and IP30 protection.
How much power should I plan for?
About 1.8 W idle with mobile data on, and about 10-11 W with every interface fully loaded.
Is a power supply included?
The standard box includes a 9 W power supply (9 VDC, 1 A, 4-pin plug).




