Teltonika RUTM20 Compact 5G Router – Dual SIM, eSIM and Wi-Fi 5 (RUTM20100300)

TeltonikaSKU: RUTM20100300

Condition: New

Price:
Sale price$598.00

Login for lower price
Stock:
In stock

Have a question? Call us! 866-369-3394

Secure payments

Free shipping on orders over $500*

Pre-sales consultation

Top Rated Customer Care

Description

The Teltonika RUTM20 (RUTM20100300) is a compact 5G router for space-tight IoT and business sites such as POS stations, surveillance points, and transport equipment. It pairs a global Telit 5G modem with dual SIM plus eSIM, dual-band Wi-Fi 5, and active PoE in/out in a 100 x 30 x 93.8 mm housing.

Single-cable PoE power simplifies installs, and eSIM lets you switch carriers remotely instead of sending a technician to swap SIM cards.

The Telecom Spot Take

The RUTM20 is the router we suggest when you want 5G but do not have room for a full-size 5G box. PoE in means one cable can carry data and power to a hard-to-reach mount, and PoE out can feed a small powered device. Dual SIM plus eSIM gives you carrier flexibility at scale. It is not the right pick if you need more than two wired ports, USB, or GNSS; the five-port RUTM50 or RUTM54 covers those jobs.

Key Features

  • Global Telit 5G modem: 5G with LTE Cat 19 support, built for broad carrier coverage, so a single model can serve sites in many regions.
  • Dual SIM plus eSIM: Automatic failover between carriers and remote carrier switching through eSIM, which cuts truck rolls on distributed installs.
  • Active PoE in/out: Power the router over the same Ethernet cable that carries data, or pass power along to a connected device, which simplifies ceiling, pole, and kiosk mounting.
  • Dual-band Wi-Fi 5: 2.4 GHz and 5 GHz 802.11 b/g/n/ac for tablets, scanners, and local clients that need faster wireless than 2.4 GHz alone.
  • Two RJ45 Ethernet ports: One for WAN or an upstream device and one for a POS terminal, camera, or switch.
  • Compact housing: 100 x 30 x 93.8 mm, small enough for POS counters, camera enclosures, and vehicle cabinets.
  • RMS management: Adopt the router into Teltonika RMS for remote monitoring, configuration, and eSIM profile management.

Technical Specifications

Specification Detail
Brand / model Teltonika RUTM20
Order code / SKU RUTM20100300
Cellular 5G with a global Telit modem; LTE Cat 19; 3G
Max RF power 24 dBm WCDMA, 24 dBm LTE, 24 dBm 5G NR, 20 dBm Wi-Fi 2.4 GHz, 23 dBm Wi-Fi 5 GHz
SIM 2 x SIM slots plus eSIM
Ethernet 2 x RJ45
Wi-Fi Dual-band 2.4 GHz / 5 GHz, 802.11 b/g/n/ac
PoE Active PoE in/out
Management HTTPS WebUI, SSH, SMS utilities (active SIM required), Teltonika RMS
LED indicators Power, 3G/4G/5G network type, signal strength, Ethernet activity
Bundled power adapter 18 W; 100-240 VAC input; 12 VDC, 1.5 A output; 4-pin plug
Average power draw About 3 W idle (no SIM); 3.5 W idle with mobile data on; 6.3-6.6 W with heavy cellular, Wi-Fi, LAN, and CPU load
Housing dimensions 100 x 30 x 93.8 mm
Weight 327 g
Operating temperature -40°C to +40°C
Operating humidity 10% to 90% (non-condensing)
HS / HTS code 851762 / 8517.62.00

What's in the Box

  • RUTM20 router
  • US PSU with 4-pin connector 18 W
  • 4 x straight compact 5G mobile antennas (SMA male)
  • 2 x straight compact Wi-Fi antennas (RP-SMA male)
  • Ethernet cable (1.5 m)
  • SIM adapter kit
  • Hex key
  • Quick Start Guide

Box contents can vary by order code. If a specific plug type or accessory matters for your install, ask us to confirm before you order.

Best For, Use Cases and Setup Tips

Best for: POS and retail counters, IP camera and surveillance points, transit and vehicle equipment, pop-up sites, and any IoT install where space is tight and a single PoE cable simplifies power.

Not ideal for: offices that need more than two wired ports, USB storage, GNSS tracking, or serial interfaces.

  • Antennas matter for 5G: Attach all four mobile antennas. After setup, check Status → Network for signal strength and reposition the router or antennas for the best reading.
  • First login: Browse to 192.168.1.1, sign in as admin with the password on the device label, and set a new password (8+ characters with an uppercase letter, a lowercase letter, and a digit).
  • Plan your carriers: Use the two SIM slots and eSIM together to set failover order, and manage eSIM profiles from the WebUI or RMS.
  • Power planning: Average draw peaks around 6.6 W in heavy use. Keep that in mind when you power the router over PoE.
  • Environment: Mount in a ventilated spot out of direct sunlight. In vehicles or near machinery, add dielectric grease to SIM contacts to prevent dropouts.

Comparison at a Glance

Model Ethernet SIM Extras Housing
RUTM20 2 x RJ45 Dual SIM + eSIM Active PoE in/out, dual-band Wi-Fi 5 100 x 30 x 93.8 mm
RUTM50 5 x Gigabit Dual SIM Dual-band Wi-Fi, GNSS, USB, 1 DI / 1 DO 132 x 44.2 x 95.1 mm
RUTM54 5 x Gigabit Dual SIM + eSIM US-made Telit modem, dual-band Wi-Fi, GNSS, USB, 1 DI / 1 DO 132 x 44.2 x 95 mm

FAQ

Does the RUTM20 support eSIM?

Yes. It has two physical SIM slots plus eSIM, with automatic failover and remote carrier switching.

Can I power it over Ethernet?

Yes. The RUTM20 supports active PoE in and PoE out, so it can be powered over the Ethernet cable or pass power to a connected device.

How many Ethernet ports does it have?

Two RJ45 ports. For five Gigabit ports, look at the RUTM50 or RUTM54.

Does it have 5 GHz Wi-Fi?

Yes. Wi-Fi is dual-band 2.4 GHz / 5 GHz, 802.11 b/g/n/ac.

What temperatures is it rated for?

-40°C to +40°C, with 10% to 90% humidity (non-condensing).

You may also like

Recently viewed