Description
The Teltonika TSW200 (TSW200000070) is an unmanaged industrial PoE+ switch that powers and connects IP phones, cameras, and access points with no configuration. Eight Gigabit ports support IEEE 802.3af and 802.3at at 30 W per port, backed by a 240 W total PoE budget, and two SFP ports carry fiber uplinks.
Because the switch acts as power sourcing equipment (PSE), you centralize power in one place instead of running an outlet to every ceiling camera or desk phone.
The Telecom Spot Take
The TSW200 is the simple answer for small and midsize sites that need dependable PoE without a management learning curve. Plug in phones, cameras, and access points and they power up. The 240 W budget covers all eight ports at a full 30 W. We'd point you to the managed TSW202 if you need VLANs or PROFINET, and to the TSW210 if your devices have their own power. Remember to budget for a DC power supply, since none comes in the box.
Key Features
- Unmanaged plug-and-play: No setup needed for basic switching, so installers can drop it into a closet or cabinet and move on.
- Eight Gigabit PoE+ ports: IEEE 802.3af and 802.3at support at 30 W per port powers VoIP phones, IP cameras, and Wi-Fi access points.
- 240 W total PoE budget: Enough for all eight ports at full PoE+ load at the same time.
- Two SFP ports: Connect fiber uplinks to reach a distant closet, another building, or a core switch.
- Wide DC input: 9-57 V input, with PoE output working when the supply provides 44 V or more.
- Low self-consumption: The switch itself draws a maximum of 5.5 W, leaving your power supply for the PoE devices.
- Compact housing: 132 x 44.2 x 95 mm and 515 g, small enough for wall cabinets and equipment enclosures.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand / model | Teltonika TSW200 |
| Order code / SKU | TSW200000070 |
| Switch type | Unmanaged industrial PoE+ switch (PSE) |
| Ethernet | 8 x Gigabit Ethernet PoE+ (RJ45) |
| SFP | 2 x SFP |
| PoE standards | IEEE 802.3af and 802.3at |
| PoE per port | 30 W |
| Max PoE budget (PSE) | 240 W |
| Input voltage | 9-57 V (44 V or higher required for PoE) |
| Max power consumption (switch only) | 5.5 W |
| Max Ethernet cable length | 100 m |
| Measured draw under PoE load | About 137 W at 54 V with 2 SFP links, 4 PoE routers, and 4 x 30 W loads under heavy traffic |
| LED indicators | Power, Ethernet activity/status |
| Housing dimensions | 132 x 44.2 x 95 mm (without connectors and screws) |
| Weight | 515 g |
| HS / HTS code | 851762 / 8517.62.00 |
What's in the Box
- TSW200 switch
- Quick Start Guide
- US PSU without connector 250 W
Best For, Use Cases and Setup Tips
Best for: small business VoIP phone rollouts, IP camera systems, Wi-Fi access point installs, and industrial cabinets that need PoE plus a fiber uplink without any configuration.
Not ideal for: networks that need VLANs, monitoring, or industrial protocols (choose the TSW202), endpoints that already have power (choose the TSW210), or closets that need more than eight PoE ports (choose the SWM282).
- Size the supply: Add up the PoE draw of your phones, cameras, and APs, then pick a supply of 44 V or more with headroom. Eight devices at a full 30 W need 240 W for PoE alone.
- Grounding: Ground the switch through its grounding screw before you connect power.
- Cable runs: Keep copper runs at 100 m or less. Use the SFP ports with fiber for longer links.
- Placement: Mount in a dry, ventilated spot away from heat sources and direct sunlight.
Comparison at a Glance
| Model | Management | Copper ports | PoE budget | Uplinks |
|---|---|---|---|---|
| TSW200 | Unmanaged | 8 x Gigabit PoE+ | 240 W | 2 x SFP |
| TSW202 | Managed (L2 + L3 features), PROFINET, EtherNet/IP, MRP | 8 x Gigabit PoE+ | 240 W | 2 x SFP |
| TSW210 | Unmanaged | 8 x Gigabit, no PoE | None | 2 x SFP |
FAQ
Is a power supply included?
Yes, US PSU without connector 250 W
What is the total PoE budget?
240 W, enough for all eight ports at a full 30 W each.
Which PoE standards does it support?
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+).
Does it need any configuration?
No. The TSW200 is unmanaged, so basic switching works as soon as it is powered and cabled, and PoE works whenever the supply provides 44 V or more.
How far can I run cable?
Copper Ethernet runs can be 100 m. Use the two SFP ports with fiber for longer distances.




