Description
The Teltonika TSW202 (TSW202000040) is a managed industrial PoE+ switch for sites that need to power and control devices from one box. Eight Gigabit PoE+ ports deliver 30 W each from a 240 W budget, two SFP ports handle fiber uplinks, and PROFINET, EtherNet/IP, and MRP support make it at home on factory networks.
It runs TSWOS with L2 switching plus additional L3 features, so you get VLAN segmentation and fine-grained control that an unmanaged switch cannot offer.
The Telecom Spot Take
The TSW202 is the switch we recommend when PoE devices need to be managed, not just powered. Eight ports at 30 W each cover PTZ cameras, access points, and IP phones, and all eight can run at full PoE+ inside the 240 W budget. PROFINET and MRP make it a fit for automation lines. It is not ideal if you just want plug-and-play PoE; the unmanaged TSW200 is simpler. You also need to supply your own DC power, since none comes in the box.
Key Features
- Managed L2 with L3 features: TSWOS gives you VLANs and network interface control to separate cameras, phones, and guest traffic on one switch.
- Eight Gigabit PoE+ ports at 30 W each: Power IP cameras, wireless access points, and VoIP phones directly from the switch, with no outlet needed at each device.
- 240 W PoE budget: Enough for all eight ports at a full 30 W at the same time.
- Two SFP ports: Run fiber uplinks between buildings or to a distant network closet.
- Industrial protocols: PROFINET, EtherNet/IP, and MRP (Media Redundancy Protocol) support for automation networks and redundant ring designs.
- Wide DC input: 9-57 VDC input, with PoE output working when the supply provides 44 V or more.
- Industrial temperature rating: -40°C to +75°C operation for cabinets and harsh environments.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand / model | Teltonika TSW202 |
| Order code / SKU | TSW202000040 |
| Switch type | Managed; L2 with additional L3 features; TSWOS |
| Ethernet | 8 x Gigabit Ethernet PoE+ (RJ45) |
| SFP | 2 x SFP |
| PoE per port | 30 W |
| Max PoE budget (PSE) | 240 W |
| Industrial protocols | PROFINET, EtherNet/IP, MRP |
| Input voltage | 9-57 VDC (44 V or higher required for PoE) |
| Max power consumption (switch only) | 8 W |
| Average draw, no PoE load | About 1.5-2.4 W idle; 4.7-5.6 W with 8 LAN and 2 SFP links under heavy traffic |
| Housing dimensions | 132 x 44.2 x 122 mm |
| Weight | 610 g |
| Operating temperature | -40°C to +75°C (+25°C maximum when running from a PSU delivered with the switch) |
| Operating humidity | 5% to 95% (non-condensing) |
| HS / HTS code | 851762 / 8517.62.00 |
What's in the Box
- TSW202 switch
- Quick Start Guide
- US PSU without connector 250W
Best For, Use Cases and Setup Tips
Best for: managed PoE for IP cameras, access points, and VoIP phones in small and midsize businesses; industrial automation networks using PROFINET, EtherNet/IP, or MRP rings; and sites that need fiber uplinks.
Not ideal for: simple plug-and-play PoE (choose the TSW200), non-PoE endpoints (choose the TSW210), or closets that need more than eight PoE ports (choose the SWM282).
- Power first: Use a supply of 44 V or more (inside the 9-57 VDC window) if you plan to use PoE, and leave headroom above your expected device load.
- Grounding: Ground the switch through its grounding terminal before you connect power.
- First login: Log in to the WebUI with the username and password printed on the device.
- PROFINET networks: When PROFINET is enabled, assign the switch IP with the Teltonika PROFINET configurator, then open the WebUI at that address.
- Firmware and security: Update TSWOS to the latest stable release and change default credentials right away.
Comparison at a Glance
| Model | Management | Copper ports | PoE budget | Uplinks |
|---|---|---|---|---|
| TSW202 | Managed (L2 + L3 features) | 8 x Gigabit PoE+ | 240 W | 2 x SFP |
| TSW200 | Unmanaged | 8 x Gigabit PoE+ | 240 W | 2 x SFP |
| TSW210 | Unmanaged | 8 x Gigabit, no PoE | None | 2 x SFP |
FAQ
Is a power supply included?
Yes, US PSU without connector 250W
Can all eight ports deliver full PoE+ at once?
Yes. Each port provides 30 W, and the 240 W budget covers all eight at full load, as long as your supply can deliver it.
Does the TSW202 support PROFINET?
Yes. It supports PROFINET, EtherNet/IP, and MRP.
Can I use fiber with it?
Yes. Two SFP ports accept SFP transceivers for fiber uplinks.
What temperatures can it handle?
-40°C to +75°C with 5% to 95% humidity (non-condensing). The maximum drops to +25°C when it runs from a PSU delivered with the switch.




