Description
Sangoma A116DE with Breakout Panel Kit
A116 is part of Sangomas family of Advanced Flexible Telecommunications hardware product line using high performance PCI Express interface, providing superior performance in critical systems all over the world. The A116 supports up to 32.8 Mbps of full duplex data throughout 480 voice calls using 16 T1/E1/J1 spans.
With Sangoma boards, you can take advantage of hardware and software improvements, as soon as they become available. The A116, like all boards in Sangomas AFT family, is field-upgradable with crash-proof firmware.
*Sangoma A116DE: PCIe, 16 spans, with H/W Echo Cancellation*
Technical Specifications
- Sixteen T1/E1 ports with optimum PCIExpress interface for high performance voice and data applications
- Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports so both T1 and E1 are supported simultaneously
- Support for Asterisk and FreeSwitch
- Fully compatible with all commercially available motherboardsproper PCI-standard interrupt sharing without manual tuning
- Dimensions: Full height by half length (107mm x 176mm)
- Connector: Dense 68 pin SCSI type interface
- Intelligent hardware: Downloadable FPGA programming with multiple operating modes; add new features related to voice and/or data when they become available
- Line decoding: HDB3, AMI, B8ZS
- Framing: CRC-4, Non CRC4, ESF, SF, D4, J1 (Japan)
- PCI Express Bus Version: 1.1
- Maximum operational power: 9W (2.42A @ 3.3V + 0.083A @ 12V)
- Temperature range: 0 50 C
- Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems
- Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI
- T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications
- Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU
- Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch
- WANPIPErouting stack is completely independent of TDM voice application for total system reliability
- WANPIPEsupports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25
Optional DSP Hardware Echo Canceller Daughterboard
- G.1682002 echo cancellation in hardware
- 1024 taps/128 ms tail per channel on all channel densities
- DTMF decoding and tone recognition
- Voice quality enhancement: music protection, acoustic echo control, and adaptive noise reduction
- Does not increase the physical size of the card, and no additional slot is required
Operating Systems
- Windows2003, WindowsXP, WindowsServer 2008, WindowsVista, Windows7
- Linux (all versions, releases and distributions from 1.0 up)
T1/E1 Status Alarms
- RED: Telco Red Alarm Condition
- OOF: Out of Frame
- LOS: Receive Loss of Signal
- AIS: Alarm Indication Signal
- RAI: Remote Alarm Indication (Yellow Alarm)
Line Protocols
Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC
Higher Level Protocols
IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE, PPPoA, IP over ATM
Certification (Pending)
- FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950, JATE
Diagnostic Tools
WANPIPEMON, System Logs
Warranty
Lifetime warranty on parts and labour. Plus a 30-day no questions asked return policy.
Production Quality
ISO 9002