Description
Viking PA-IP SIP/Multicast Paging Adapter with Amplifier
Viking PA-IP SIP/multicast paging adapter provides an interface between new VoIP phone systems and analog paging systems, eliminating the need for an ATA or FXS port. You can use Viking PA-IP as standard SIP endpoint or multicast IP paging and background music
PA-IP connects easily with a single CAT5/6 cable from your PoE switch. An auxiliary trigger input allows an optional hard wired switch or phone system trigger output to enable loud ringing / night bell from after hour incoming calls. Line-level audio output connections are provided for connecting to an external amplifier. A built-in 4 Watt class D amplifier with speaker output connections are also provided to drive up to 4 analog speakers. A programmable relay output is provided for triggering external amplifiers, etc. *Installation typically requires a network administrator or IT technician.
Viking PA-IP Highlighted Features:
- PoE powered (class 2, <6.5 watts)
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Red “Page/Status” LED indicator
- SIP compliant (see pageg 2 for list of compatible IP-PBX phone systems)
- Autoprovisioning via Viking programming software
- Built-in high efficiency 4 watt class D amplifier
- Relay for activating door locks, strobe lights, external amplifiers, etc.
- SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Network remote volume control
- Can drive additional external analog speakers for greater coverage